1. Home
  2. /
  3. Catalog
  4. /
  5. Triview Glass

Auction Info

FURNACES/AUTOCLAVES
(2016) Landglass Mod. LD21425, LD-Flat Glass Tempering Furnace, 4-19mm Thickness Range, 20m x 35m x 2.8m Overall Size. S/N 1607071
(2009) Landglass Mod. LDA2450, 2440 x 5000mm, 8′ Horiz. Roller Hearth Flat Bend Tempering Furnace, Convection Type, 4-19mm Thickness Cap., Siemens CNC Controller, 2450 Record & Thickness Controller, Elec. Heating Tempering, 250 Kw Blower Cooling Section, Cooling Tower. S/N LL-393
Bond Tech 7′ x 20′ Autoclave, (4) Vantage Heating Sections, Holtec Gas Generator, Vacuum Pump.
(1992) Baker 3′ x 6′ Autoclave, 100 PSI Autoclave. S/N 19
LAMINATING LINE
Laminating Line w/ Billco 8′ Glass Washer/Dryer S/N 87186; Modular Cold Room w/ Bridge Crane, Glass Laminate Layout Tables; DD1200 Air Dryer; (6) Laminate Material Stands; Shenzhen Transfer Table; (2010) Shenzhen Dual Heating Section; Dual Roller Laminating Sections, Type UY22 Dual, 8′ Width (2200mm). S/N 1006214
WATER TREATMENT
(2015) Waste Water Treatment System w/ Water Treatment Solutions J-Press & Poly Storage Table, Control Panel, Pumps
Han Jiang Washing Machine w/ Drying Station
GLASS CUTTERS
(2010) Techni/Glass Master Mod. Intec 510GM, 55000 PSI CNC Water Jet Machine, 5′ x 8′ Table, Intensifier. S/N TW255
(2008) Bavelloni Mod. Syncro Cutting MTS37/27B, CNC Glass Cutter, 8′ x 14′ Tilt Vacuum Table, Offeed Layout Table. S/N 510464
(2008) Bavelloni Tavolo Rev 372SR, CNC Glass Cutter w/ Bavelloni-Glaston CNC Controls. S/N 540609
(2008) Bavelloni Mod. TAVOLOREV372SR, 12′ CNC Glass Cutter. S/N 510509
Intermac Genius RS-A Cutting Table. S/N 1000015149
GLASS EDGE MACHINES
(2016) CMB Besana Mod. R11TS Vertical Glass Edger/Polisher w/ Drilling. S/N 6440316
(2013) Fushan-I.G.E. Mod. FJM-10-45, 10′ Glass Edger w/ 2-Head Drilling. S/N 2013-10-008
(2008) Glaston-Bavelloni Mod. GEMYV10, 10′ Glass Edger w/ Drilling. S/N 113363
(2007) Bavelloni Mod. SB10, Rotary Glass Edge Beveler w/ Vacuum Table. S/N 101234
(2001) Besana Mod. R11TS, Vert. Glass Edger – Polisher w/ Drilling. S/N 5470201
(2) Han Jiang Mod. HJ-BTEL 1296, Glass Edger, Butyl Extruders. S/Ns 2W8AT, n/a
CF 4′ Glass Edge Sander
Alkab Edge Delegator
GLASS WASHERS
(2011) Han Jiang Mod. HJ-LINE, 3007F, Auto. Glass Insulating Line w/ Washing – Drying. S/N 11-10
(2009) Handong Mod. OX75111-HD, 2500mm, 8′ Glass Washer – Brush – Drying Clean Line, 40mm Thickness. S/N 0901001
(2008) HanDong Mod. DX22 14-5 Washing & Drying Machine, 3mm Glass Thickness, 2500mm Max Glass Size, 300 x 300mm Min Glass Size. S/N 9616113
(2008) APM Mod. LVTOP1642, 6′ Vert. Glass Brush – Wash – Cleaner – Dryer. S/N 21-08
(1998) Bovone Mod. Mini-Max 371, 7-Head Vert. Glass Washer. S/N 89069504
GLASS DRILLS
(2010) Kinglass Mod. BYM1321, Glass Drill. S/N 10-41Z
(2008) Hilditech Mod. BZ0215, Glass Drill. S/N 08-30
(2008) Bavelloni Mod. VT1250 A+L, Glass Drill. S/N Z10050
MISC. GLASS MACHINERY
Goldglass Technologies Mod. MRC-2850-M, Glass Painting Machine w/ Air System & Mechanic System, Infratech Controls
(3) (2012) Glass Machinery Mod. DBS106W, Dbl. Belt Sander w/ Donaldson Dust Collection & Conveyor Feed System. S/Ns 70785, 68935, n/a
Intermac Mod. Master 38-3 Vertical CNC Glass Machine Center w/ Intermac CNC Controls, 80 x 130” Table. S/N 1000021114
(2016) Intermac Vertimax 2, Vertical Drilling Machine w/ CNC Controls. S/N 10000005865
(2011) Han Jiang Mod. HJ-DAFM-2008, Desiccant Auto. Filler. S/N 11-05-02
4500 PDS per Drawer Glass Handling System
Han Jiang CNC IG Bender
DDU Fusion UV 11-Station UV Dryer
GRF 23-Station Roll Out Glass Rack
12′ x 12′ Tilt Type Vacuum Lay Up Glass Table
(85) 4-Wheel Port. Glass Racks
(4) Woods Power Grip Glass Vacuum Lifts
Woods Powr-Grip 450lb. Vacuum Material Handler
Walco 72″ Roller Coater, #22. S/N n/a
SPRAY BOOTHS
Spray Zone Jet Refinishing Spray Booth
Alfema Walk-In Glass Sand Blast Booth w/ Dust Collector
Alfema Glass Sand Blast Booth
BRIDGE CRANES
Craneveyor 1-Ton Free Standing Bridge Crane
Spanco ½-Ton Free Standing Bridge Crane
Landglass Tempering Booth
AIR COMPRESSORS
Ingersoll Rand R55n Nirvana VSO Efficiency Total Air System, 75hp w/ Ingersoll Rand Receiving Tank. S/N NK2859016290
(2009) Ingersoll Rand 30hp Rotary Screw Air Compressor. S/N UQ0792U09159
(2007) Ingersoll Rand Rotary 15hp Screw Air Compressor. S/N PX9497U07295
(2003) Ingersoll Rand 15hp Rotary Screw Air Compressor. S/N CBV166169
PRINTERS
(2007) Grandinnovations Jet 1-3150, 8′ Laser Jet Printer. S/N 3-15104
AWT Seri Glide 6′ x 10′ Squeeze Screen Printer
(2) VideoJet Mod. AD Oracle Ink Jet Printers. S/Ns 50049300002, 50050291064
VideoJet Mod. 3140 Ink Jet Printer
FORKLIFTS
(2004) Hyster Mod. S155XL2, 15000 Lb. L.P.G. Forklift. S/N C024V01821B
(2) Hyster Mod. S120XLS, 12000 Lb. L.P.G. Forklifts. S/N F004V01990B (2003); S/N DC04V08218R (1994)
Hyster Mod. S50XM, 5000 Lb. L.P.G. Forklift. S/N D187V258852
ROLLING STOCK
(2) (2011) Unruh Semi-Trailer Gooseneck Trailers. Vins. #A1062236, n/a
(2010) Stillwater Gooseneck Trailer. Vin. #A1513028
(2004) Chevy C2500HD SI. Vin. #E288993
(1991) Fontaine 26′ Flat Bed, Drop Deck. Vin. #M1550998
(1974) Fontaine 40′ Flatbed. Vin. #19295
MISC. SHOP
Hyster Mod. W40Z, Elec. Pallet Jack. S/N R218N23383J
Graco Butyl Pump w/ Gun
Han Jiang Mod. HJ-BTEL-2W8AT, Butyl Extruder
JLG Mod. 3220, Scissor Lift

Auction Inspection

See Auctioneer's Website for Inspection Information

Terms & Conditions

AUCTION TERMS AND CONDITIONS

 

SALE DATE: ____________________ @ 10:30am

 

INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.

 

******All sales in U.S. dollars only!!******

 

*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.

 

*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items.  If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items.  Once you win, you are responsible for paying.

 

*Bidding online will take place through www.bidspotter.com or www.industrialbid.com.  Please only register online if you plan on bidding online.  If you are coming to the sale, you must register at the sale site.  Also, please only choose one platform to bid on, not both.

 

***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. ***  PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE. 

 

*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.

*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.

 

 

SALES TAX

ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX

 

                        , CA Sales Tax:           %

 

*For those doing business in California:  The only way to be exempt from sales tax is to furnish us with a copy of your resale license.  Simply telling us your resale number is not sufficient; you must provide an actual copy for our records.  We do not keep resale licenses on file at the office.  In addition, your resale license must have current information, including the name of your company and address.  If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.

 

If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license.  In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted.  You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof.  We reserve the right to deny any resale license that appears questionable.

 

*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines.  Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states.  Also, moving the items across a state border yourself doesn’t count.  You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.

 

***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax.  If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued.  There are NO exceptions to this.  If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected.  Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment.  Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.

 

***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***

 

ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license.  A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.

 

LOT REMOVAL

 

CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.

 

Removal of lots is entirely the responsibility of the bidder.  We do not package, load or ship.  There will be no equipment, like forklifts, onsite to facilitate your lot removal.  It is up to you to hire a rigger or otherwise provide for the removal of your items.

 

Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers.  You will have to facilitate any and all paperwork involved with removing your items across borders.

 

While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:

 

Advanced Riggers & Millwrights

Mark Grzybowski – 951-361-9187 / 951-505-8353

 

Red Line Machinery Movers

Bernie Crist - 323-888-8772

 

Beltran Machinery Moving

Gabriel Beltran - 888-815-0079

 

Santa Fe Machinery Movers

Carlos Sanchez: 562-927-0020

 

Inland Rigging

Steven Fangmeyer: 951-581-2185

 

M&M Machinery Moving Inc.

Mike Ortega - 213-494-7581

 

IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.

 

IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.

 

 

GOOD LUCK AND HAPPY BIDDING!

 

 

Shipping info

AUCTION TERMS AND CONDITIONS

 

SALE DATE: ____________________ @ 10:30am

 

INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.

 

******All sales in U.S. dollars only!!******

 

*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.

 

*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items.  If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items.  Once you win, you are responsible for paying.

 

*Bidding online will take place through www.bidspotter.com or www.industrialbid.com.  Please only register online if you plan on bidding online.  If you are coming to the sale, you must register at the sale site.  Also, please only choose one platform to bid on, not both.

 

***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. ***  PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE. 

 

*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.

*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.

 

 

SALES TAX

ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX

 

                        , CA Sales Tax:           %

 

*For those doing business in California:  The only way to be exempt from sales tax is to furnish us with a copy of your resale license.  Simply telling us your resale number is not sufficient; you must provide an actual copy for our records.  We do not keep resale licenses on file at the office.  In addition, your resale license must have current information, including the name of your company and address.  If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.

 

If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license.  In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted.  You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof.  We reserve the right to deny any resale license that appears questionable.

 

*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines.  Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states.  Also, moving the items across a state border yourself doesn’t count.  You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.

 

***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax.  If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued.  There are NO exceptions to this.  If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected.  Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment.  Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.

 

***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***

 

ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license.  A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.

 

LOT REMOVAL

 

CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.

 

Removal of lots is entirely the responsibility of the bidder.  We do not package, load or ship.  There will be no equipment, like forklifts, onsite to facilitate your lot removal.  It is up to you to hire a rigger or otherwise provide for the removal of your items.

 

Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers.  You will have to facilitate any and all paperwork involved with removing your items across borders.

 

While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:

 

Advanced Riggers & Millwrights

Mark Grzybowski – 951-361-9187 / 951-505-8353

 

Red Line Machinery Movers

Bernie Crist - 323-888-8772

 

Beltran Machinery Moving

Gabriel Beltran - 888-815-0079

 

Santa Fe Machinery Movers

Carlos Sanchez: 562-927-0020

 

Inland Rigging

Steven Fangmeyer: 951-581-2185

 

M&M Machinery Moving Inc.

Mike Ortega - 213-494-7581

 

IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.

 

IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.

 

 

GOOD LUCK AND HAPPY BIDDING!

 

 

AUCTION TERMS AND CONDITIONS

 

SALE DATE: ____________________ @ 10:30am

 

INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.

 

******All sales in U.S. dollars only!!******

 

*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.

 

*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items.  If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items.  Once you win, you are responsible for paying.

 

*Bidding online will take place through www.bidspotter.com or www.industrialbid.com.  Please only register online if you plan on bidding online.  If you are coming to the sale, you must register at the sale site.  Also, please only choose one platform to bid on, not both.

 

***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. ***  PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE. 

 

*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.

*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.

 

 

SALES TAX

ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX

 

                        , CA Sales Tax:           %

 

*For those doing business in California:  The only way to be exempt from sales tax is to furnish us with a copy of your resale license.  Simply telling us your resale number is not sufficient; you must provide an actual copy for our records.  We do not keep resale licenses on file at the office.  In addition, your resale license must have current information, including the name of your company and address.  If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.

 

If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license.  In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted.  You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof.  We reserve the right to deny any resale license that appears questionable.

 

*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines.  Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states.  Also, moving the items across a state border yourself doesn’t count.  You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.

 

***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax.  If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued.  There are NO exceptions to this.  If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected.  Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment.  Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.

 

***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***

 

ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license.  A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.

 

LOT REMOVAL

 

CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.

 

Removal of lots is entirely the responsibility of the bidder.  We do not package, load or ship.  There will be no equipment, like forklifts, onsite to facilitate your lot removal.  It is up to you to hire a rigger or otherwise provide for the removal of your items.

 

Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers.  You will have to facilitate any and all paperwork involved with removing your items across borders.

 

While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:

 

Advanced Riggers & Millwrights

Mark Grzybowski – 951-361-9187 / 951-505-8353

 

Red Line Machinery Movers

Bernie Crist - 323-888-8772

 

Beltran Machinery Moving

Gabriel Beltran - 888-815-0079

 

Santa Fe Machinery Movers

Carlos Sanchez: 562-927-0020

 

Inland Rigging

Steven Fangmeyer: 951-581-2185

 

M&M Machinery Moving Inc.

Mike Ortega - 213-494-7581

 

IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.

 

IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.

 

 

GOOD LUCK AND HAPPY BIDDING!

 

 

AUCTION TERMS AND CONDITIONS

 

SALE DATE: ____________________ @ 10:30am

 

INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.

 

******All sales in U.S. dollars only!!******

 

*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.

 

*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items.  If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items.  Once you win, you are responsible for paying.

 

*Bidding online will take place through www.bidspotter.com or www.industrialbid.com.  Please only register online if you plan on bidding online.  If you are coming to the sale, you must register at the sale site.  Also, please only choose one platform to bid on, not both.

 

***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. ***  PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE. 

 

*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.

*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.

 

 

SALES TAX

ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX

 

                        , CA Sales Tax:           %

 

*For those doing business in California:  The only way to be exempt from sales tax is to furnish us with a copy of your resale license.  Simply telling us your resale number is not sufficient; you must provide an actual copy for our records.  We do not keep resale licenses on file at the office.  In addition, your resale license must have current information, including the name of your company and address.  If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.

 

If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license.  In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted.  You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof.  We reserve the right to deny any resale license that appears questionable.

 

*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines.  Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states.  Also, moving the items across a state border yourself doesn’t count.  You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.

 

***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax.  If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued.  There are NO exceptions to this.  If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected.  Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment.  Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.

 

***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***

 

ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license.  A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.

 

LOT REMOVAL

 

CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.

 

Removal of lots is entirely the responsibility of the bidder.  We do not package, load or ship.  There will be no equipment, like forklifts, onsite to facilitate your lot removal.  It is up to you to hire a rigger or otherwise provide for the removal of your items.

 

Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers.  You will have to facilitate any and all paperwork involved with removing your items across borders.

 

While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:

 

Advanced Riggers & Millwrights

Mark Grzybowski – 951-361-9187 / 951-505-8353

 

Red Line Machinery Movers

Bernie Crist - 323-888-8772

 

Beltran Machinery Moving

Gabriel Beltran - 888-815-0079

 

Santa Fe Machinery Movers

Carlos Sanchez: 562-927-0020

 

Inland Rigging

Steven Fangmeyer: 951-581-2185

 

M&M Machinery Moving Inc.

Mike Ortega - 213-494-7581

 

IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.

 

IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.

 

 

GOOD LUCK AND HAPPY BIDDING!