Auction Info
FARM TRACTORS
- (2020) John Deere Mod. 8320RT Rubber Crawler, Enclosed Cab Canopy, Air Conditioner; S/N 1RW8320RKKS920258
- (2005) John Deere Mod. 8420, 4WD Cab. w/ Air Conditioning; S/N RW8420P0Y3339
- (2006) New Holland Mod. TJ380, 4WD Cab. w/ Air Conditioning & Laser Plane Controls; S/N 26F200243
- (2) (2012) John Deere 5065M, 4WD; S/Ns DPCB411273, MPCB411268
- (2) (2004) John Deere Mod. 5520, 4WD; S/Ns S452558, S452448
- (2) (2005) John Deere Mod. 5425; S/Ns T142226, T142225
- (2) (1999) John Deere Mod. 5420; S/Ns 142305, S142306
- John Deere Mod. 5220, Sync Shuttle; S/N 122207
- (2) (2005) John Deere Mod. 5225; S/Ns T122080, T122087
- (2) (2003) John Deere Mod. 5205; S/Ns C420684, C420680
- John Deere Mod. 5200; S/N E520880
- Kubota Mod. M5700, 4WD; S/N 51331
- Kubota Mod. M4900, 4WD; S/N 53389
- Kubota Mod. B1700 w/ Sprayers; S/N 70293
- New Holland Mod. TC55DA; S/N HX10643
- (2) Ford 6610; S/Ns B215724, N/A; (3) Ford 4610; Kubota Mod. M5400; Kubota Mod. M4700; Kubota Mod. L4150; Kubota Mod. M4030 SU; Kubota Mod. L3750; Kubota Mod. L2050; Landini 5860; (4) Massey Ferguson 298, 275, 270, 245
FORKLIFTS & BACKHOES
- (16) (2002-2007) Princeton Mod. Z2-3TX, Piggy Back Forklifts, (13) Push Type
- (2000) Moffett M4000E
- (2004) Lift King Mod. LK6M22
- Harlo HP 6,500lb., 4WD, Pneumatic Tires
- (4) (2005) Harlo 5,000lb. Pneumatic Tires
- (3) JCB 926, 5,000lb.
- (3) (1990) Case 586E & 585E
- (2) Case 580B & 580E Backhoe/Loaders
HARVESTERS
- (2) (2006) Brower 1570 Sod Harvester w/ JD 5225 Tractors
- (5) Brower SH1500-18-RF Sod Harvester w/ Ford 3910 & 3600 Tractors
- (2) Bucyrus Magnum 42” Big Roll Harvester
- Stolon Chopper Harvesters
- (2006) Woener 4825 Big Roll Crawler Installer
MOWERS
- (2018) Toro Mod. 3575D, 5-Gang Fairway Reel Mower
- John Deere 3235, 96” 5-Gang Reel
- (2) John Deere 3225B
- John Deere 25A Flail
- Kubota ZD331, 72”
- Kubota F2680E
- Toro 4000-D Reel Master; Toro 352 Reel Master w/ Dehatcher Blades; Toro 450D; Dandl 10’ Flail; (7) Nunes 8’ Mower Sweepers
IMPLEMENTS
- (2018) Forigo Mod. G45-Raptor 380, 12’ Reverse Rototiller; S/N G9832
- Schmeiser 20’ Wheeled Transport Cultipacker
- (2) FDS 9200 Spring Tine Turf Detacher
- John Deere 670, 16’ Wheeled Transport Tandem Disk Harrow; S/N P00670X004056
- 16’ Wheeled Transport Tandem Disk Harrow
- John Deere 455 Disk Harrow; S/N 0100091A
- Agriplane Leveler 35’ x 16’
- Marvin 40’ Land Plane; S/N 053-463
- 15’ Laser Scraper; S/N N2570-1916
- (1997) Landall Harrell Mod. 6306 Switch Plow; S/N BP10932697
- John Deere 995, 7-Bottom Reversible Plow; S/N P00995X005209
- John Deere 915 7-Shank Ripper; S/N N00915X006401
- John Deere 5-Shank Ripper
- John Deere Mod. 911, 7-Shank Ripper; S/N 5536
- Northwest 16’ Mod. DD-HC-192 S Rototiller; S/N RB7035
- Northwest 12’ Rototiller
- (2) New Holland Mod. 185 Manure Spreaders; S/N 214148
- Little Rhino Blade Scraper; Rhino Mod. 950, 3-Pt Hitch Blade; (5) Brillon Mod. SLP-10’ Grass Seeders; (2) Accu-Spray 500 Gal. Boom Sprayers; 200 Gal. Boom Sprayer; Vicon Fertilizer Sprayer; S/N 75406-7722; Agrimetal Tuff-Vac 5000; Turf-Vac FM110; Hardi 160 Gal. Boom Sprayer; 12’ Spiketooth Harrow; (3) Schmeiser Ring Rollers; (2) Stolon Planters; 10’ Roller; (2) 10- 3-Scetion Drag Rollers; (2) Flat Rollers; (2) 10’ Drag Scrapers; S/N LS102076; RB950-4 Scraper
Approx. 225,000 Linear Ft (30’ Lengths) 3” & 4” Aluminum Sprinkler Irrigation Pipe w/ Risers, Sprinklers & Trailers
Approx. 4800’ Linear Ft. (20’ Sections) 8” & 10” Main
MISC.
- (3) Honda Recon & Rally Bombadier ATVs
- (9) 40’ Storage Containers
- (11) 20’ Storage Containers
- (2) Port. Diesel Tanks; (4) Poly Fertilizer Tanks; Tool Carrier; Maintenance Shop w/ (2003) Mac Tools Wheelatronic 9,000lb. Two-Post Vehicle Hoist; Welders; Lathes; Band Saws & an Enormous Amount of Parts; Misc. Office Furniture & Equipment
ROLLING STOCK
- (1974) Clark 40’ Flatbed Semi-Trailer w/ Forklift Mount
- (2) (1985) Dorsey 42’ Flatbed Semi-Trailers w/ Forklift Mounts
- (1983) Aztec 42’ Semi-Trailer w/ Forklift Mounts. Vin 013896
- (1979) Great Dane 42’ Flatbed Semi-Trailer w/ Forklift Mount
- (2) Trailmobile 26’ Flatbed Trailers
- Trailmobile 40’ Flatbed Semi-Trailer w/ Forklift Mount
- (6) (1988) Trailmobile 28’ Pull Trailers w/ Forklift Mounts
- (2) (2002) Utility 24’ Pull Trailers
- Baker Drop Deck Trailer
- (2) (2002) Utility 42’ Flatbed Semi-Trailers w/ Forklift Mounts
- Utility 45’ Flatbed Semi-Trailer w/ Forklift Mount
- (1979) Peterbilt COE, 3-Axle Flatbed Truck
- (8) (2002-2008) Ford F250 Crew Cab Pickup Trucks
- Utility 24’ Van Trailer
- (2005) Big Tex 15’ Tandem Axle Utility Trailer
- (2) Chevy Suburbans
- (3) (2008) Dodge Caravans
- (1979) Ford F700D Water Truck
- (1975) Chevy C65 Water Truck
- (1979) International 5-Yard Dump Truck
- (2011) Ford F150, 4WD Pickup Truck
Auction Inspection
INSPECTION: Mon. & Tues. October 24th & 25th, 9am to 4pm & the Morning of the Sale
Terms & Conditions
AUCTION TERMS AND CONDITIONS
SALE DATE: ____________________ @ 10:30am
INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.
******All sales in U.S. dollars only!!******
*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.
*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items. If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items. Once you win, you are responsible for paying.
*Bidding online will take place through www.bidspotter.com or www.industrialbid.com. Please only register online if you plan on bidding online. If you are coming to the sale, you must register at the sale site. Also, please only choose one platform to bid on, not both.
***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. *** PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE.
*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.
*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.
SALES TAX
ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX
, CA Sales Tax: %
*For those doing business in California: The only way to be exempt from sales tax is to furnish us with a copy of your resale license. Simply telling us your resale number is not sufficient; you must provide an actual copy for our records. We do not keep resale licenses on file at the office. In addition, your resale license must have current information, including the name of your company and address. If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.
If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license. In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted. You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof. We reserve the right to deny any resale license that appears questionable.
*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines. Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states. Also, moving the items across a state border yourself doesn’t count. You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.
***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax. If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued. There are NO exceptions to this. If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected. Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment. Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.
***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***
ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license. A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.
LOT REMOVAL
CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.
Removal of lots is entirely the responsibility of the bidder. We do not package, load or ship. There will be no equipment, like forklifts, onsite to facilitate your lot removal. It is up to you to hire a rigger or otherwise provide for the removal of your items.
Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers. You will have to facilitate any and all paperwork involved with removing your items across borders.
While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:
Advanced Riggers & Millwrights
Mark Grzybowski – 951-361-9187 / 951-505-8353
Red Line Machinery Movers
Bernie Crist - 323-888-8772
Beltran Machinery Moving
Gabriel Beltran - 888-815-0079
Santa Fe Machinery Movers
Carlos Sanchez: 562-927-0020
Inland Rigging
Steven Fangmeyer: 951-581-2185
M&M Machinery Moving Inc.
Mike Ortega - 213-494-7581
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
GOOD LUCK AND HAPPY BIDDING!
AUCTION TERMS AND CONDITIONS
SALE DATE: ____________________ @ 10:30am
INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.
******All sales in U.S. dollars only!!******
*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.
*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items. If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items. Once you win, you are responsible for paying.
*Bidding online will take place through www.bidspotter.com or www.industrialbid.com. Please only register online if you plan on bidding online. If you are coming to the sale, you must register at the sale site. Also, please only choose one platform to bid on, not both.
***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. *** PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE.
*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.
*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.
SALES TAX
ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX
, CA Sales Tax: %
*For those doing business in California: The only way to be exempt from sales tax is to furnish us with a copy of your resale license. Simply telling us your resale number is not sufficient; you must provide an actual copy for our records. We do not keep resale licenses on file at the office. In addition, your resale license must have current information, including the name of your company and address. If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.
If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license. In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted. You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof. We reserve the right to deny any resale license that appears questionable.
*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines. Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states. Also, moving the items across a state border yourself doesn’t count. You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.
***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax. If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued. There are NO exceptions to this. If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected. Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment. Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.
***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***
ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license. A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.
LOT REMOVAL
CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.
Removal of lots is entirely the responsibility of the bidder. We do not package, load or ship. There will be no equipment, like forklifts, onsite to facilitate your lot removal. It is up to you to hire a rigger or otherwise provide for the removal of your items.
Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers. You will have to facilitate any and all paperwork involved with removing your items across borders.
While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:
Advanced Riggers & Millwrights
Mark Grzybowski – 951-361-9187 / 951-505-8353
Red Line Machinery Movers
Bernie Crist - 323-888-8772
Beltran Machinery Moving
Gabriel Beltran - 888-815-0079
Santa Fe Machinery Movers
Carlos Sanchez: 562-927-0020
Inland Rigging
Steven Fangmeyer: 951-581-2185
M&M Machinery Moving Inc.
Mike Ortega - 213-494-7581
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
GOOD LUCK AND HAPPY BIDDING!
AUCTION TERMS AND CONDITIONS
SALE DATE: ____________________ @ 10:30am
INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.
******All sales in U.S. dollars only!!******
*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.
*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items. If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items. Once you win, you are responsible for paying.
*Bidding online will take place through www.bidspotter.com or www.industrialbid.com. Please only register online if you plan on bidding online. If you are coming to the sale, you must register at the sale site. Also, please only choose one platform to bid on, not both.
***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. *** PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE.
*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.
*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.
SALES TAX
ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX
, CA Sales Tax: %
*For those doing business in California: The only way to be exempt from sales tax is to furnish us with a copy of your resale license. Simply telling us your resale number is not sufficient; you must provide an actual copy for our records. We do not keep resale licenses on file at the office. In addition, your resale license must have current information, including the name of your company and address. If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.
If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license. In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted. You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof. We reserve the right to deny any resale license that appears questionable.
*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines. Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states. Also, moving the items across a state border yourself doesn’t count. You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.
***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax. If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued. There are NO exceptions to this. If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected. Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment. Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.
***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***
ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license. A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.
LOT REMOVAL
CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.
Removal of lots is entirely the responsibility of the bidder. We do not package, load or ship. There will be no equipment, like forklifts, onsite to facilitate your lot removal. It is up to you to hire a rigger or otherwise provide for the removal of your items.
Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers. You will have to facilitate any and all paperwork involved with removing your items across borders.
While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:
Advanced Riggers & Millwrights
Mark Grzybowski – 951-361-9187 / 951-505-8353
Red Line Machinery Movers
Bernie Crist - 323-888-8772
Beltran Machinery Moving
Gabriel Beltran - 888-815-0079
Santa Fe Machinery Movers
Carlos Sanchez: 562-927-0020
Inland Rigging
Steven Fangmeyer: 951-581-2185
M&M Machinery Moving Inc.
Mike Ortega - 213-494-7581
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
GOOD LUCK AND HAPPY BIDDING!
AUCTION TERMS AND CONDITIONS
SALE DATE: ____________________ @ 10:30am
INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.
******All sales in U.S. dollars only!!******
*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.
*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items. If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items. Once you win, you are responsible for paying.
*Bidding online will take place through www.bidspotter.com or www.industrialbid.com. Please only register online if you plan on bidding online. If you are coming to the sale, you must register at the sale site. Also, please only choose one platform to bid on, not both.
***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. *** PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE.
*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.
*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.
SALES TAX
ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX
, CA Sales Tax: %
*For those doing business in California: The only way to be exempt from sales tax is to furnish us with a copy of your resale license. Simply telling us your resale number is not sufficient; you must provide an actual copy for our records. We do not keep resale licenses on file at the office. In addition, your resale license must have current information, including the name of your company and address. If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.
If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license. In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted. You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof. We reserve the right to deny any resale license that appears questionable.
*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines. Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states. Also, moving the items across a state border yourself doesn’t count. You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.
***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax. If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued. There are NO exceptions to this. If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected. Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment. Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.
***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***
ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license. A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.
LOT REMOVAL
CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.
Removal of lots is entirely the responsibility of the bidder. We do not package, load or ship. There will be no equipment, like forklifts, onsite to facilitate your lot removal. It is up to you to hire a rigger or otherwise provide for the removal of your items.
Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers. You will have to facilitate any and all paperwork involved with removing your items across borders.
While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:
Advanced Riggers & Millwrights
Mark Grzybowski – 951-361-9187 / 951-505-8353
Red Line Machinery Movers
Bernie Crist - 323-888-8772
Beltran Machinery Moving
Gabriel Beltran - 888-815-0079
Santa Fe Machinery Movers
Carlos Sanchez: 562-927-0020
Inland Rigging
Steven Fangmeyer: 951-581-2185
M&M Machinery Moving Inc.
Mike Ortega - 213-494-7581
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
GOOD LUCK AND HAPPY BIDDING!
