Auction Info
GRAIN STORAGE & HANDLING EQUIPMENT
- Wheatland Malt Silo (100,000lb Cap.)
- Frisen Malt Silo (50,000lb Cap.)
- 39 ft. Flex Auger, c/w 60o Boot & 3/4hp Motor
- 100 ft. Flex Auger, c/w 60o Boot & 3/4hp Motor
MILLING & GRIST EQUIPMENT
- Rosekam Mill, 4-Roll w/ 3HP Motor Drive, Manual Slide Gate; c/w Mill Stand & Boot Assembly
- (2) Grist Augers, ¾ HP Motors & Flex Augers
BREWHOUSE – 50 BBL FINALCAST OUT
- (2017) Hot Liquor Tank – Capacity 175 bbl; c/w Heat Exchanger, Pump & Recirculation Loop, Hard-Piped to Brewhouse
- Cold Liquor Tank – Capacity 65 bbl; c/w Heat Exchanger, Pump & Recirculation Loop, Static CIP Spray, Hard-Piped to Brewhouse
- Grist Case – Top Manway Entry, Load Cells and Scale; Double Manual Slide Gate; Manual Grist Hydrator
- Mash/Lauter Turn – Capacity 50 bbl; Insulated Walls S.S. Milled False Bottom Screen – Station CIP Balls; Dedicated Sparge Assembly; Bottom Pneumatic Grain Out- Closed Hot Wort Grant; Manual Valves & 2 HP Baldor Pump – Lauter Rakes (2-Arm, Variable Rotation Speed Controlled, No Elevation Adjustment) w/ Manual Release Grain Plows
- Brew Kettle – Capacity 50 bbl; LP Steam Jacketed (Bottom and Side) & LP Internal Steam Calandria; S.S. Venting Directly to Outside; Static CIP Spray Balls. SPX Pump
- Whirlpool – Capacity 50 bbl, Flat-Bottom Design; Manual Spent Hop Removal
- Wort Cooker – Proflow Single-Stage Plate & Frame HEX; c/w in-line Oxygenation Assembly, By-pass Piping; Manual Valves and Wort Temperature Controls
- Brewhouse Piping & Valves – Piping, Fasteners and Valves all S.S.
- Platform and Supporting Frame – Custom Build, Frame and Supports Painted Mild Steel w/ Multi-Step Non-Slip Grates
- Steam Supply & Controls – Manual Control, Pneumatic and Hand-Held Valves
- Brewhouse Process Control System – Painted Steel Control Panel w/ Separate and Independent Temperature and Motor Controls
- (2011) Brewhouse CIP System – 2x CIP Tanks (Open); c/w Baldor Pump & Manual Valves
(34) FERMENTATION /AGING CELLAR EQUIPMENT
- Fermentation/Aging Tanks – (4) 50bbl Santa Rosa Unitanks; Glycol Jacketed; c/w S.S. Racking Arm & Valve; CIP/Venting Arm and Manual Valve; Supporting Legs Mild Painted Steel
- Fermentation/Aging Tanks – (18) 100bbl Santa Rosa Unitanks; Glycol Jacketed; c/w S.S. Racking Arm & Valve, CIP/Venting Arm and Manual Valve; Supporting Legs Mild Painted Steel
- Fermentation/Aging Tanks – (2) 150bbl Santa Rosa Unitanks; Glycol Jacketed; c/w S.S. Racking Arm & Valve, CIP/Venting Arm and Manual Valve; Supporting Legs Mild Painted Steel
- (2011) Fermentation/Aging Tanks – (2) 200bbl Santa Rosa Unitanks; Glycol Jacketed; c/w S.S. Racking Arm & Valve, CIP/Venting Arm and Manual Valve; Supporting Legs Mild Painted Steel
- (2012) Fermentation/Aging Tanks – (8) 300bbl Santa Mueller Fermenters; Glycol-Jacketed; c/w S.S. Racking Arm & Valve; CIP/Venting Arm and Manual Valve, Drain Valve; Supporting Legs S.S.
- Unitanks Temp Control System – Separate Individual Temp Controllers per Unitank, Mounted into S.S. Temp Controller Cabinets
- Beer Transfer Pumps – (2) Portable Baldor Pumps (2HP) w/ VFDs
FILTRATION & BRIGHT BEER CELLAR EQUIPMENT
- Filtration – Velo 7.5 sq. Meter DE Filter, all Stainless; Manual Valves and Pump Starter; Pall Candle Filter; Housing Stainless, c/w Supports, Manual Valves & Associated Piping
- Cellar CIP Station – CIP Station Production w/ (2) – 1/2HP; CIP Chemical Holding Tanks
- Bright Beer Tanks – (3) 100bbl Santa Rosa BBT; Glycol Jacketed; c/w S.S. Carbonating Stone, CIP/Venting Arm and Manual Valves
- Bright Beer Tanks – (1) 150bbl Santa Rosa BBT; Glycol Jacketed; c/w S.S. Carbonating Stone, CIP/Venting Arm and Manual Valves
- (2011) Bright Beer Tanks – (1) 200bbl Mueller BBT; Glycol Jacketed; c/w S.S. Carbonating Stone, CIP/Venting Arm and Manual Valves
UTILITY SERVICE EQUIPMENT
- (2012) Refrigeration System – Glycol Chiller 80 Ton Carrier (Outdoor Rated); c/w 4 Scroll Compressors, 150 Gal. Glycol Reservoir; Baldor Vari. Spd. 5hp for Glycol; Weinman Glycol Pump w/ 5hp Motor; 300 Gal. Holding Glycol Reservoir (Insulated)
- Air Compressors – Ingersoll Rand T30 Air Compressors (30HP)
- (2012) Air Compressors – Quincy Vari. Spd. Air Compressor (30 HP), 400 Gal. Compressed Air Holding Tank, Zek Compressed Air Dryer
- Compressed Air Dryer – Premier Refrigeration Compressed Air Drier, 30 SCFM
- Primary LP Boiler – Ajax Boiler Mod. HNG3000, Refurbished Natural Gas Low Pressure Steam Boiled – Derated by 20% Max Output 1,920,000 BTU/Hr
PACKAGING EQUIPMENT
- Bottle Line – Climax Uncaser; Unipack Twist Rinser; Krones 20 Valve Bottle Filler Mod. VK2V 132/ZZKK-103 Filler Crowner (S/N 120-613); Krones Robusta Neck Labeler (S/N 722-509); Domino D320i Ink Jet Coder; 3M Matic Case Sealing System & Tape Machine; (4) Pearson Carrier Opener; Pearson Multipacker; ABC Bottle Sealer; Gray Depalletizer; Conveyors
- Canning Line – Wild Goose Canning Line
- (2012) Keg Washer/Filler – KHS-Mono Bloc Kegging Line; Vari. Spd. Pump for Keg Line; Step Up Transformer for Keg Line; Schmalze Keg Vacuum Picker; Bryan Electric Boiler for KHS Keg Line; CIP Transfer Pumps for Keg Line
- Unisource Stretch Wrapper
MISC. EQUIPMENT
- (2015) Yard King Portable Ramp – Painted Steel Frame w/ S.S. Non-Slip Ramp
- Self-Dumping Hoppers – (3) Galbraith Self-Dumping Hoppers
- Cold Room & Refrigeration System – Cooler, c/w 4 x 3 HP Cooling Units (Trenton Refrigeration); Draft System
- Draft System – Glycol Desk for Speak Easy
- Komatsu Propane Forklift
- Big Ass Fan w/ 7.5’ Wing Span
- Toyota 40,000lb. Mast Forklift
- Hyster Electric Forklift
- Bliff 16,000 Pump
Auction Inspection
Mon & Tues., May 23rd & 24th, 9AM to 4PM & Morning of the Sale
Terms & Conditions
AUCTION TERMS AND CONDITIONS
SALE DATE: ____________________ @ 10:30am
INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.
******All sales in U.S. dollars only!!******
*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.
*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items. If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items. Once you win, you are responsible for paying.
*Bidding online will take place through www.bidspotter.com or www.industrialbid.com. Please only register online if you plan on bidding online. If you are coming to the sale, you must register at the sale site. Also, please only choose one platform to bid on, not both.
***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. *** PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE.
*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.
*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.
SALES TAX
ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX
, CA Sales Tax: %
*For those doing business in California: The only way to be exempt from sales tax is to furnish us with a copy of your resale license. Simply telling us your resale number is not sufficient; you must provide an actual copy for our records. We do not keep resale licenses on file at the office. In addition, your resale license must have current information, including the name of your company and address. If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.
If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license. In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted. You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof. We reserve the right to deny any resale license that appears questionable.
*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines. Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states. Also, moving the items across a state border yourself doesn’t count. You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.
***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax. If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued. There are NO exceptions to this. If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected. Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment. Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.
***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***
ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license. A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.
LOT REMOVAL
CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.
Removal of lots is entirely the responsibility of the bidder. We do not package, load or ship. There will be no equipment, like forklifts, onsite to facilitate your lot removal. It is up to you to hire a rigger or otherwise provide for the removal of your items.
Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers. You will have to facilitate any and all paperwork involved with removing your items across borders.
While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:
Advanced Riggers & Millwrights
Mark Grzybowski – 951-361-9187 / 951-505-8353
Red Line Machinery Movers
Bernie Crist - 323-888-8772
Beltran Machinery Moving
Gabriel Beltran - 888-815-0079
Santa Fe Machinery Movers
Carlos Sanchez: 562-927-0020
Inland Rigging
Steven Fangmeyer: 951-581-2185
M&M Machinery Moving Inc.
Mike Ortega - 213-494-7581
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
GOOD LUCK AND HAPPY BIDDING!
AUCTION TERMS AND CONDITIONS
SALE DATE: ____________________ @ 10:30am
INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.
******All sales in U.S. dollars only!!******
*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.
*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items. If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items. Once you win, you are responsible for paying.
*Bidding online will take place through www.bidspotter.com or www.industrialbid.com. Please only register online if you plan on bidding online. If you are coming to the sale, you must register at the sale site. Also, please only choose one platform to bid on, not both.
***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. *** PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE.
*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.
*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.
SALES TAX
ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX
, CA Sales Tax: %
*For those doing business in California: The only way to be exempt from sales tax is to furnish us with a copy of your resale license. Simply telling us your resale number is not sufficient; you must provide an actual copy for our records. We do not keep resale licenses on file at the office. In addition, your resale license must have current information, including the name of your company and address. If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.
If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license. In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted. You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof. We reserve the right to deny any resale license that appears questionable.
*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines. Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states. Also, moving the items across a state border yourself doesn’t count. You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.
***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax. If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued. There are NO exceptions to this. If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected. Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment. Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.
***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***
ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license. A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.
LOT REMOVAL
CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.
Removal of lots is entirely the responsibility of the bidder. We do not package, load or ship. There will be no equipment, like forklifts, onsite to facilitate your lot removal. It is up to you to hire a rigger or otherwise provide for the removal of your items.
Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers. You will have to facilitate any and all paperwork involved with removing your items across borders.
While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:
Advanced Riggers & Millwrights
Mark Grzybowski – 951-361-9187 / 951-505-8353
Red Line Machinery Movers
Bernie Crist - 323-888-8772
Beltran Machinery Moving
Gabriel Beltran - 888-815-0079
Santa Fe Machinery Movers
Carlos Sanchez: 562-927-0020
Inland Rigging
Steven Fangmeyer: 951-581-2185
M&M Machinery Moving Inc.
Mike Ortega - 213-494-7581
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
GOOD LUCK AND HAPPY BIDDING!
AUCTION TERMS AND CONDITIONS
SALE DATE: ____________________ @ 10:30am
INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.
******All sales in U.S. dollars only!!******
*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.
*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items. If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items. Once you win, you are responsible for paying.
*Bidding online will take place through www.bidspotter.com or www.industrialbid.com. Please only register online if you plan on bidding online. If you are coming to the sale, you must register at the sale site. Also, please only choose one platform to bid on, not both.
***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. *** PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE.
*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.
*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.
SALES TAX
ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX
, CA Sales Tax: %
*For those doing business in California: The only way to be exempt from sales tax is to furnish us with a copy of your resale license. Simply telling us your resale number is not sufficient; you must provide an actual copy for our records. We do not keep resale licenses on file at the office. In addition, your resale license must have current information, including the name of your company and address. If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.
If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license. In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted. You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof. We reserve the right to deny any resale license that appears questionable.
*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines. Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states. Also, moving the items across a state border yourself doesn’t count. You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.
***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax. If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued. There are NO exceptions to this. If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected. Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment. Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.
***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***
ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license. A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.
LOT REMOVAL
CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.
Removal of lots is entirely the responsibility of the bidder. We do not package, load or ship. There will be no equipment, like forklifts, onsite to facilitate your lot removal. It is up to you to hire a rigger or otherwise provide for the removal of your items.
Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers. You will have to facilitate any and all paperwork involved with removing your items across borders.
While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:
Advanced Riggers & Millwrights
Mark Grzybowski – 951-361-9187 / 951-505-8353
Red Line Machinery Movers
Bernie Crist - 323-888-8772
Beltran Machinery Moving
Gabriel Beltran - 888-815-0079
Santa Fe Machinery Movers
Carlos Sanchez: 562-927-0020
Inland Rigging
Steven Fangmeyer: 951-581-2185
M&M Machinery Moving Inc.
Mike Ortega - 213-494-7581
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
GOOD LUCK AND HAPPY BIDDING!
AUCTION TERMS AND CONDITIONS
SALE DATE: ____________________ @ 10:30am
INSPECTION DATE: ____________________________ from 9am-4pm & the morning of the sale.
******All sales in U.S. dollars only!!******
*All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an "as is" basis.
*Please remember that a bid is a verbal contract; once you become the successful bidder, you must pay for your items. If you find that the riggers you contact are charging you high fees, that doesn’t mean that you can abandon your items. Once you win, you are responsible for paying.
*Bidding online will take place through www.bidspotter.com or www.industrialbid.com. Please only register online if you plan on bidding online. If you are coming to the sale, you must register at the sale site. Also, please only choose one platform to bid on, not both.
***FULL AND FINAL PAYMENT MUST BE MADE IN CASH, CASHIER’S CHECK, WIRE TRANSFER ONLY. *** PAYMENT MUST BE MADE, OR WIRE INITIATED, BY CLOSE OF BUSINESS THE DAY AFTER THE SALE.
*ON THE FLOOR BUYERS PREMIUM IS 15% OF HAMMER PRICE.
*ONLINE BUYERS PREMIUM IS 18% OF HAMMER PRICE.
SALES TAX
ALL SALES WILL BE SUBJECT TO LOCAL SALES TAX
, CA Sales Tax: %
*For those doing business in California: The only way to be exempt from sales tax is to furnish us with a copy of your resale license. Simply telling us your resale number is not sufficient; you must provide an actual copy for our records. We do not keep resale licenses on file at the office. In addition, your resale license must have current information, including the name of your company and address. If the name and address on your resale license don’t match the name and address you register with, that license is unacceptable.
If your business card and/or business name don’t explicitly state that you are in the business of buying and selling the type of machinery you are buying from us, we may choose to refuse your resale license. In other words, if you are in the business of wood working and you buy office furniture at our auction, do not expect to have your resale license accepted. You may want to provide us with a copy of an ad for your company, demonstrating that you are in the business of buying and selling the type of equipment you are purchasing from us, as proof. We reserve the right to deny any resale license that appears questionable.
*For those doing business outside of California: The only way to be exempt from sales tax is to furnish us with a copy of your Bill of Lading, demonstrating that the items purchased at auction have crossed state lines. Do not fax us a copy of your state resale license; California doesn't accept resale licenses from other states. Also, moving the items across a state border yourself doesn’t count. You must have a common carrier move the items, and then give you a Bill of Lading which you then send us a copy of.
***IMPORTANT***In ALL cases, without exception, if you cannot furnish us with the required tax exemption proof BEFORE payment is made, then you MUST pay the tax. If you can furnish us with the required documentation after payment is made, but within 21 days of the sale, a refund will be promptly issued. There are NO exceptions to this. If you make a wire transfer to us, or obtain a cashiers’ check, without including the tax and before giving us the required documents, you will not be allowed to remove any equipment until the situation is corrected. Obviously, if you are relying on a Bill of Lading for tax exemption, you will not be able to provide copies of documents until after the items are moved, and so please be aware of this rule when making payment. Also, we remit the sales tax we collect to the Board of Equalization on a monthly basis, so if you take longer than 21 days to get tax exemption proof to us, it will be too late: we will not take steps to try and retrieve your sales tax from the Board of Equalization once the taxes are turned in.
***If we have any doubts as to the veracity of tax exemption claims, we reserve the right to refuse tax exemption status.***
ADDITIONAL INFO FOR THOSE BUYING VEHICLES: as of 10/2012, we are required to collect sales tax on vehicles except when a buyer has a DMV-issued vehicle dealers’ license. A regular CA SBOE issued resale permit will not remove the sales tax from vehicle purchases.
LOT REMOVAL
CHECK-OUT WILL BE ANNOUNCED CLOSER TO THE SALE DATE.
Removal of lots is entirely the responsibility of the bidder. We do not package, load or ship. There will be no equipment, like forklifts, onsite to facilitate your lot removal. It is up to you to hire a rigger or otherwise provide for the removal of your items.
Additionally, if you are moving items out of the country, please understand that we do not act as customs brokers. You will have to facilitate any and all paperwork involved with removing your items across borders.
While we do not work with or endorse any riggers, we can provide you with contact information for riggers who have requested that we do so:
Advanced Riggers & Millwrights
Mark Grzybowski – 951-361-9187 / 951-505-8353
Red Line Machinery Movers
Bernie Crist - 323-888-8772
Beltran Machinery Moving
Gabriel Beltran - 888-815-0079
Santa Fe Machinery Movers
Carlos Sanchez: 562-927-0020
Inland Rigging
Steven Fangmeyer: 951-581-2185
M&M Machinery Moving Inc.
Mike Ortega - 213-494-7581
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
IMPORTANT: Due to buyers being lax about removing their items in a timely fashion, we are implementing a $500 per day fee for entry into the facility every day past the time allotted for check out.
GOOD LUCK AND HAPPY BIDDING!
